Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

The material that appears on our site is for informational and entertainment purposes only. These video clips are to serve as means of demonstration of operating either the exact or similar vehicle on the site. The purpose of collected videos are to provide customers with useful and supplemental information on products we carry on site , please note the vehicles shown in the videos often share common specs, but might not be the exact model or make as the vehicles for sale on our site. The video streams of ScooterDepot.us have been gathered from the Internet, from free sites, friends, users etc. and are believed to be in the "public domain". Except as noted, no videos on this site are affiliated with ScooterDepot.us. If you are a copyright holder and there is any specific intellectual property that you do not wish them to appear on the site, please contact us and they will be removed immediately on demand.

Description: - Back to Top -      

How much do you spend on your commute with your 18 - 25 mile per gallon car every week? I would imagine it's expensive. Are you looking for an alternative transportation to get you to school, grocery stores or work? Tired of spending hundreds of dollars to fill up your gas tank? Then you have come to the right place. Gas scooters have become the most popular and affordable transportation. With the costs of gasoline rising, more and more people are choosing gas scooters simply because they are fun, stylish, comfortable, easy to operate and most importantly – affordable! A few dollars get you around the town for the whole week! That sounds really good! Yep! They’re economic. Replacing car trips with a stylish scooter saves on insurance, purchase price, and related registration fees. You can substitute a gas scooter for a car or reap incredible savings by utilizing one less car. They’re easy to use. These scooters are simple to maintain and repair. You can run errands easier, quicker, and have more fun. In traffic-congested areas, scooters are quicker than cars. No more frustrating and stressful traffic jams. Instead you’ll be gliding stress free.

This particular model is top of the line in its class. This luxury 3000cc trike has all the options and features at an unbeatable price. The TS300R’s light weight and flickable nature allows it to dart through the concrete jingle while leaving cage pilots trailing behind in the wake of its flatulent exhaust note. Delivering up to 70 miles per gallon is just an added bonus. There's plenty of under-seat storage for your gear. Rear dual hydraulic suspension adds to rider comfort, and disc brake both front and rear provides a safer handling on any road condition.

Being a factory direct importer enables us offering you unbelievable discounted prices, we also guarantee great service – our tech support team stands by 5 days a week to assist you with any questions you may have. We carry most of the common spare parts in stock; 6-month limited parts warranty. You can be assured that we will provide the best in quality and service at the very best price!

Some Assembly required: In most cases and depending on which model purchased, it usually takes anywhere from 10min.-40 min. to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping. For packaging purposes, the battery, handle bars, trunk(if included at time of puchase), and mirrors are removed during testing. These items along with the vehicle will be shipped in a protective crate. To complete the assembly of your vehicle, you will need to properly install/assemble the contents included with your vehicle. Depending on the model purchased, you will usually find these items in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time,(and periodically before every ride). Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need some cleaning due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our tech support team toll-free Monday through Friday 8am-5pm PST at 909-287-0366, or by E-mail at tech@scooterdepot.us. In some instances, it may be necessary for your vehicle to be setup by a local service center for proper set-up and tuning, prior to initial use. This service is commonly referred to as PDI(Pre-Delivery Inspection). Be sure to check for adequate engine fluid levels to help ensure that your vehicle will operate safely according to the manufacturer’s recommended specifications, prior to first use. It is mandatory to have the existing motor/engine oil(known as “packing oil”) already in your motor/engine, replaced prior to first initial use, with conventional Four Stroke “Motorcycle Grade” (SAE 15W-40 motor oil). Local pick-ups and optional assembly services are available upon request.

Remember! You are responsible for performing the setup/”PDI” that a dealer would normally perform. i.e.- installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc. Items such as lose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loose of hardware. Occasionally, on some units, it may be necessary to perform other routine checks/adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment(if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Please, feel free to get in contact with our Tech Support Department either by E-mail at tech@scooterdepot.us or by phone at (909)287-0366

BE A RESPONSIBLE RIDER! FOR SAFETY, READ YOUR OWNER'S MANUAL. ALWAYS WEAR A HELMET, EYE PROTECTION, AND PROTECTIVE CLOTHING! NEVER RIDE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL! Parents consider your youngster’s age, size, ability, and maturity before allowing them to ride. Never engage in stunt driving or ride at excessive speeds. Be careful on difficult terrain. An adult must supervise riders under 16 years of age. ScooterDepot recommends that ALL riders take a training course. For more information visit the ASI website www.safety.org

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST. 

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST. 

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST. 

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST. 

The Future of the Trikes- Powerful, Stylish & Innovative! Exclusively offered by Sunny Sports!

Fun, Nimble & Agile!

The ultimate commuting Trike offers unprecedented performance & safety.

Introducing this pioneering three-wheeler scooter, with two front wheels!

This 150cc Trike is designed with safety and stability in mind-it provides more road grip and more stability. In fact, on all of these levels, it does what no two-wheeler could try and match. The Roadrunner 150 also has been blessed with power and performance, with all these elements in place, its ease of use should make for an extremely entertaining and compelling ride.

The front assembly, with two totally independent wheels that tilt, is said to be significantly more stable than any scooter. It grasps the road, providing the rider with the most performance possible and with total safety.

The magical part of the Roadrunner 150 is that front end. It really is that good. It’s stable and planted in low to mid-speed turns. Feel confidence to ride in comfort, with decent wind protection below 50 mph!

It had been said that the Roadrunner has no equal in terms of safety around town and city traffic.

The impressive gas mileage makes this 150cc scooter a perfect economical way of getting around. In addition to all the amazing advantages of this 150cc moped scooter, they also don't cost much to maintain. The Roadrunner 150 is equipped with a 150cc 4-stroke engine that is much quieter, cleaner, and lasts longer than comparable 2-stroke engines.

The Roadrunner isn’t a magic carpet that rides itself. You still have to be comfortable balancing, braking and riding a big, heavy scooter. But it is a fun, economical and practical! The comfortable seating position, ample storage room under the seat and a locking trunk make this 150cc Trike a perfect commuting or weekend fun machine.

Up to 70 MPG: Ultimate Gas Saver! This gas scooter for sale gets 70 miles per gallon which is extremely fuel efficient and environmentally friendly.

Enhanced Headlights: This 150cc scooter features ultimately enhanced headlights with low beam - high beam. These headlights are bigger and provide light at angles that most mopeds cannot support.

High Performance Hydraulic Disc Brakes: This 150cc gas Moped features the fully upgraded hydraulic disc braking system on the front and Rear, which delivers smooth stops in half the distance of standard. Inspire confirdence and relaxation for all riders.

4 stroke 150cc with Fully Automatic Transmission: This scooter is equipped with a powerful 4stroke engine provides power for a strong ride on any road condition. Plenty of power and room for two, with integrated passenger footrest. This is a great vehicle for those first-time-riders or for anyone who doesn't want to deal with the hassle of changing gears.

Product Highlights:

• Matching rear storage trunk with lock (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum rims
• Hydraulic disc brakes Front and Rear
• 12" DOT-approved tires
• EPA approved and street legal in all states except for CA, NJ.

Remember every purchase from Scooter Depot includes:  

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support(Priceless)
  
• 1 year Engine and Frame warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance
  
  

STREET LEGAL:

US EPA (Environmental Protection Agency) APPROVED
Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)

 
US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA & NJ.

Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t pick products from different factories; we design, select the best quality parts, and build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

The Future of the Trikes- Powerful, Stylish & Innovative! Exclusively offered by Sunny Sports!

Introducing this pioneering three-wheeler scooter, with two front wheels!

This 50cc Trike is designed with safety and stability in mind-it provides more road grip and more stability. In fact, on all of these levels, it does what no two-wheeler could try and match. The Zooma 50 also has been blessed with power and performance, with all these elements in place, its ease of use should make for an extremely entertaining and compelling ride.

The front assembly, with two totally independent wheels that tilt, is said to be significantly more stable than any scooter. It grasps the road, providing the rider with the most performance possible and with total safety.

It had been said that the Zooma has no equal in terms of safety around town and city traffic.

The impressive gas mileage makes this 50cc scooter a perfect economical way of getting around. In addition to all the amazing advantages of this 50cc moped scooter, they also don't cost much to maintain. The Zooma 50 is equipped with a 50cc 4-stroke engine that is much quieter, cleaner, and lasts longer than comparable 2-stroke engines.

Up to 70 MPG: Ultimate Gas Saver! This gas scooter for sale gets 70 miles per gallon which is extremely fuel efficient and environmentally friendly.

Enhanced Headlights: This 50cc scooter features ultimately enhanced headlights with low beam - high beam. These headlights are bigger and provide light at angles that most mopeds cannot support.

High Performance Hydraulic ABS Disc Brakes: This 50 gas Moped features the fully upgraded ABS hydraulic disc braking system on the front and Rear, which delivers smooth stops in half the distance of standard. Inspire confirdence and relaxation for all riders.

4 stroke 50cc with Fully Automatic Transmission: This scooter is equipped with a powerful 4stroke engine provides power for a strong ride on any road condition. Plenty of power and room for two, with integrated passenger footrest. This is a great vehicle for those first-time-riders or for anyone who doesn't want to deal with the hassle of changing gears.

Product Highlights:

• Matching rear storage trunk with lock (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum rims
• Hydraulic disc brakes Front and Rear
• 12" DOT-approved tires
• EPA approved and street legal in all states except for NJ & PA.

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance
  
  

STREET LEGAL:

US EPA (Environmental Protection Agency) APPROVED
Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)

US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for NJ. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t pick products from different factories; we design, select the best quality parts, and build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST. 

How much do you spend on your commute with your 18 - 25 mile per gallon car every week? I would imagine it's expensive. Are you looking for an alternative transportation to get you to school, grocery stores or work? Tired of spending hundreds of dollars to fill up your gas tank? Then you have come to the right place. Gas scooters have become the most popular and affordable transportation. With the costs of gasoline rising, more and more people are choosing gas scooters simply because they are fun, stylish, comfortable, easy to operate and most importantly – affordable! A few dollars get you around the town for the whole week! That sounds really good! Yep! They're economic. Replacing car trips with a stylish scooter saves on insurance, purchase price, and related registration fees. You can substitute a gas scooter for a car or reap incredible savings by utilizing one less car. They're easy to use. These scooters are simple to maintain and repair. You can run errands easier, quicker, and have more fun. In traffic-congested areas, scooters are quicker than cars. No more frustrating and stressful traffic jams. Instead you'll be gliding stress free.

This particular model MC_TS2502 is top of the line in its class. This luxury 250cc moped has all the options and features at an unbeatable price. The MC_TS2502's light weight and flickable nature allows it to dart through the concrete jingle while leaving cage pilots trailing behind in the wake of its flatulent exhaust note. Delivering up to 70 miles per gallon is just an added bonus. There's plenty of under-seat storage for your gear. Rear dual hydraulic suspension adds to rider comfort, and disc brake both front and rear provides a safer handling on any road condition. The 250cc scooter can get up to 70 miles to the gallon.

Street Legal: This scooter for sale is registerable as a street legal vehicle in 49 states excluding California.

Up to 70 MPG: Ultimate Gas Saver! This gas scooter for sale gets 70 miles per gallon which is extremely fuel efficient and environmentally friendly.

**Additional $150 shipping cost per unit will apply to Shipments to Washington, D.C., MA, MD, FL, VA, NY, Virgin Islands, and $400 for Hawaii.

An unusual but well-designed scooter that's way more fun to ride than it looks.

Aggressive styling and performance; incredible power and a real touring comfort turns every trip into a joy ride.

Pros

• Innovative design offers more stability, better handling
• Fun factor is high, thanks to loads of grip from two front tires
• Fuel economy in the mid-60 MPG range
• A unique way to stand out in a crowd

The modern scooter has been around for over sixty years, but the Roadrunner 300 offers a new twist, with two fronts that look clunky but offer numerous functional advantages.

The electro-hydraulic suspension can be locked at speeds below a few miles per hour, making it possible to keep your feet on the floorboards when approaching a red light or stop sign.

Ergonomics are comfortable for taller riders. The Roadrunner 300 is wider than most scooters, but still narrows enough for lane-splitting, and the 300cc's single-cylinder engine produces 18.5 horsepower at 5,500 rpm. Acceleration is strong enough for urban traffic, and its CVT transmission doesn't require shifting. But perhaps the most entertaining aspect of the Roadrunner 300 is its ability to corner; once you get over your natural inclination to avoid high speed turns, those two front wheels create an exhilarating ride and allow lean angles of 40 degrees with excellent grip.

The Roadrunner 300 is an innovative reinterpretation of the Trike concept that should make riding accessible to a whole new group of enthusiasts.

Revolutionary Chassis

The front end, consisting of two independent tilting wheels, allows the rider to lean at an angle of up to 40 degrees on a bend remaining glued to the road. The high-strength tubular steel frame guarantees the best stability and distribution of weight, in perfect harmony with the engine and suspensions.

Aggressive styling

Roadrunner 300 has innovative, eye-catching styling while maintaining a clear resemblance to the range. Complete instrumentation - elegant and technological, the dash shows the rider all vehicle information at a glance. The key also acts as a seat opener, whilst from the ignition block you can open the fuel cover and rear hatch. The front-end design is genuinely innovative in terms of technical features and concept, with car-style bodywork treatment. The Built in hard case Saddlebag trunk provide tons of storage.

Street Legal: This powerful three-wheel reverse trike is registerable as a street legal vehicle in 47 states, excluding CA, CT & NJ.  

Enhanced Headlights: This innovative 300cc reverse Trike features enhanced headlights with low beam - high beam. These headlights are bigger and provide light at angles that most mopeds cannot support.

High Performance Hydraulic ABS Disc Brakes: Fully upgraded ABS hydraulic disc braking system on the front and Rear, which delivers smooth stops in half the distance of standard. Inspire confidence and relaxation for all riders.

4 stroke 300cc with Fully Automatic Transmission: This powerful Trike is equipped with a powerful 4-stroke engine provides power for a strong ride on any road condition. Plenty of power and room for two, with integrated passenger footrest. This is a great vehicle for those first-time-riders or for anyone who doesn't want to deal with the hassle of changing gears.

Product Highlights: 

• 4 Stroke 300CC Water-Cooled Engine Top speed 70+ mph (depends on rider's weight and road condition).
•  Aluminum Rims
• Front & Rear Hydraulic disc brakes
• EPA approved and street legal in all states Exclude CA, CT, NJ, and PA.

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine and frame limited warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance

US EPA (Environmental Protection Agency) APPROVED

Unique & Genuine Factory VIN Number

 
US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA and NJ. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation:  We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

Where to locate your VIN#:

Vehicle Identification Number is usually located on the front of the steering stem or at the bottom of the floor mat, where you would place your foot. The VIN number consists of a 17 digit alpha numeric number, and usually has the engine number located on the same plate. The plated steel mount can be either black or steel.

Each MSO Title certificate will be accompanied by a Bill of Sale and Invoice for registration purposes. If your state requires your MSO to be notarized, please indicate on your MSO request form. There is a $25.00 fee for each notary. We offer overnight service for an additional $55.00. Please note: overnight service only guarantees we mail your documents via overnight service. We do not guarantee your MSO will be prepared and processed overnight. There is $20.00 fee for each replacement MSO.

Once you receive these documents, you need to take them with your scooter or motorcycle to your local DMV (Department of Motor Vehicle). They will inspect the bike and compare the VIN (Vehicle Identification Number) on the paperwork to the one on the scooter. They will inspect the vehicle as well. Your DMV will collect the sales tax as well as any applicable registration fee and will issue a license plate for your vehicle.

The certificate of origin is an official title document that releases the scooter from the importer to the dealer. The dealer released the scooter to you. All documents for every street legal vehicle are usually sent in the mail 2 to 4 days after the scooter is shipped. Please note, we do not mail your MSO and Bill of Sales alone with your scooter, there is a possibility of receiving your registration information before you even receive your vehicle, since the LTL trucking company usually has longer transit time frame compares to first class mail service. We request each customer to confirm your VIN by email if you don’t receive your registration documentations 7 business days after receiving your street legal scooter or motorcycle. To confirm: simply send an email to mso@scooterdepot.us include your order number and VIN in the subject or the body. We have professional title staff to process your title request immediately. MSO request generally requires 3-5 business days to process, and it is FREE of charge. The VIN (Vehicle Identification Number) is a unique 17 digit number. The VIN can be found on the outside of the shipping carton or on the scooter itself. You may also contact our MSO department representatives directly at 626-343-2077.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

The Future of the Trikes- Powerful, Stylish & Innovative! Exclusively offered by Sunny Sports!

Introducing this pioneering three-wheeler scooter, with two front wheels!

2^nd Generation of Roadrunner 150! Upgraded Styling!

Fun, Nimble & Agile! The ultimate commuting Trike offers unprecedented performance & safety.

This 150cc Trike is designed with safety and stability in mind-it provides more road grip and more stability. In fact, on all of these levels, it does what no two-wheeler could try and match. The Roadrunner 150 also has been blessed with power and performance, with all these elements in place, its ease of use should make for an extremely entertaining and compelling ride.

The front assembly, with two totally independent wheels that tilt, is said to be significantly more stable than any scooter. It grasps the road, providing the rider with the most performance possible and with total safety.

The magical part of the Roadrunner 150 is that front end. It really is that good. It’s stable and planted in low to mid-speed turns. Feel confidence to ride in comfort, with decent wind protection below 50 mph!

It had been said that the Roadrunner has no equal in terms of safety around town and city traffic.

The impressive gas mileage makes this 150cc scooter a perfect economical way of getting around. In addition to all the amazing advantages of this 150cc moped scooter, they also don't cost much to maintain. The Roadrunner 150 is equipped with a 150cc 4-stroke engine that is much quieter, cleaner, and lasts longer than comparable 2-stroke engines.

The Roadrunner isn’t a magic carpet that rides itself. You still have to be comfortable balancing, braking and riding a big, heavy scooter. But it is a fun, economical and practical! The comfortable seating position, ample storage room under the seat and a locking trunk make this 150cc Trike a perfect commuting or weekend fun machine.

Up to 70 MPG: Ultimate Gas Saver! This gas scooter for sale gets 70 miles per gallon which is extremely fuel efficient and environmentally friendly.

Enhanced Headlights: This 150cc scooter features ultimately enhanced headlights with low beam - high beam. These headlights are bigger and provide light at angles that most mopeds cannot support.

High Performance Disc Brakes: This 150cc gas Moped features the fully upgraded disc braking system on the front and Rear, which delivers smooth stops in half the distance of standard. Inspire confirdence and relaxation for all riders.

4 stroke 150cc with Fully Automatic Transmission: This scooter is equipped with a powerful 4stroke engine provides power for a strong ride on any road condition. Plenty of power and room for two, with integrated passenger footrest. This is a great vehicle for those first-time-riders or for anyone who doesn't want to deal with the hassle of changing gears.

Product Highlights:

• Matching rear storage trunk with lock (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum rims
• Hydraulic disc brakes Front and Rear
• 12" DOT-approved tires
• EPA approved and street legal in all states except for CA and NJ.
  

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support(Priceless)
  
• 1 year Engine and Frame warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance
  
  

STREET LEGAL:

US EPA (Environmental Protection Agency) APPROVED
Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)

 
US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA and NJ.

Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t pick products from different factories; we design, select the best quality parts, and build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.