4 stroke 150cc with Fully Automatic Transmission:  This scooter is equipped with a powerful 4stroke engine provides power for a strong ride on any road condition. The 4-stroke engine ensures a fast and easy startup because there is no need to mix any fluids, just gas it up and go! Plenty of power and room for two, and relatively quiet, if a little busy at higher revs, the 150 has enough poke that you don't need to consider major arterials. Top speed is over 65 MPH. This is a great vehicle for those first-time-riders or for anyone who doesn't want to deal with the hassle of changing gears.

Contemporary Telescopic Front Forks / High Performance Hydraulic ABS Disc Brakes:  This 150 gas Moped features the fully upgraded ABS hydraulic disc braking system on the front, which delivers smooth stops in half the distance of standard. Safety concerns often put off potential scooter buyers, but with this breaking system there will be no problem stopping in an emergency or even in the rain. The ABS braking system allows the novice to brake as efficiently as a rider with years of experience. These advanced new safety systems ensure that the front wheel will not skid under braking no matter what the road condition, furthermore stopping distances will be dramatically reduced by over 8.2 meters. Inspire confidence and relaxation for all riders. You could grab as little or as much as you want and the single rotor and piston set-up will pull you up without hesitation or complaint from the standard tyres.

Up to 90 MPG:  Ultimate Gas Saver! This gas scooter for sale gets 90 miles per gallon which is extremely fuel efficient and environmentally friendly.

Electric and Kick Start:  This scooter comes with both electric and kick starting system that makes it simple to start up, even for first time riders. If you somehow get into trouble though, then it is always great to have a reliable back up kick start method.

Enhanced Headlights:  This 150cc scooter features ultimately enhanced headlights with low beam - high beam. These headlights are bigger and provide light at angles that most mopeds cannot support.

Stylish User Friendly & Easy to Read Dash Console:   The easy to read dash is well laid out with a nice big white dial in the centre to indicate speed. It shows Speed, Fuel gauge, high-low beams and turn signals.

Upgraded Mirror-finished chrome-covered exhaust:  A great additional to its already incomparable stylish design. It really made this scooter look like a premium scooter, not something that was slapped together cheaply.

Tons of Storage Space:  Lockable gloves box located in the front underneath instrument panel area, Carrying compartment under locking seat is big enough for storing a full-face helmet and standard tools; Lockable rear Trunk with Built-in Reflectors. Plenty of room for you to carry your personal belongings.

Pre-Built License Plate Bracket:  Pre-built in Universal Size license plate holder to make your scooter riding experience as easy as possible.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Product Highlights:

• Matching rear locking storage trunk (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum Rims
• Front & Rear tires 130/60-13
• Front ABS Hydraulic Disc Brake
• EPA approved and street legal in all states except CA &  NJ

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine and Frame warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance. 

STREET LEGAL:

US EPA (Environmental Protection Agency) APPROVED

Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)

 
US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA and NJ. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation:  We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

Where to locate your VIN#:
Vehicle Identification Number is usually located on the front of the steering stem or at the bottom of the floor mat, where you would place your foot. The VIN number consists of a 17 digit alpha numeric number, and usually has the engine number located on the same plate. The plated steel mount can be either black or steel.

Each MSO Title certificate will be accompanied by a Bill of Sale and Invoice for registration purposes. If your state requires your MSO to be notarized, please indicate on your MSO request form. There is a $25.00 fee for each notary. We offer overnight service for an additional $55.00. Please note: overnight service only guarantees we mail your documents via overnight service. We do not guarantee your MSO will be prepared and processed overnight. There is $20.00 fee for each replacement MSO.

Once you receive these documents, you need to take them with your scooter or motorcycle to your local DMV (Department of Motor Vehicle). They will inspect the bike and compare the VIN (Vehicle Identification Number) on the paperwork to the one on the scooter. They will inspect the vehicle as well. Your DMV will collect the sales tax as well as any applicable registration fee and will issue a license plate for your vehicle.

The certificate of origin is an official title document that releases the scooter from the importer to the dealer. The dealer released the scooter to you. All documents for every street legal vehicle are usually sent in the mail 2 to 4 days after the scooter is shipped. Please note, we do not mail your MSO and Bill of Sales alone with your scooter, there is a possibility of receiving your registration information before you even receive your vehicle, since the LTL trucking company usually has longer transit time frame compares to first class mail service. We request each customer to confirm your VIN by email if you don’t receive your registration documentations 7 business days after receiving your street legal scooter or motorcycle. To confirm: simply send an email to mso@scooterdepot.us include your order number and VIN in the subject or the body. We have professional title staff to process your title request immediately. MSO request generally requires 3-5 business days to process, and it is FREE of charge. The VIN (Vehicle Identification Number) is a unique 17 digit number. The VIN can be found on the outside of the shipping carton or on the scooter itself. You may also contact our MSO department representatives directly at 626-343-2077.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

Once again, we take pride of our workmanship and technology that has went into the creation of this 50cc scooter. This is one of the greatest additions to our existing 50cc scooters line. It offers all the great features and road carrying capacity of our 150cc unit, except it a 50cc engine machine! While maintaining the amazing fuel efficient level, this large wheel scooter offers more leg room for taller and larger riders and excellent stability at high speeds. Equipped with a rock solid GY6 4 stroke motor, a hydraulic front disc brake, large 12 inches wheels, sporty body styling, comfortable seat, storage trunk, and custom designed windshield.

The Basics:

They are so popular because they are not only fuel efficient (up to 95 mpg) but also you can drive without a special license in most areas. They are simpler to get on and off and easy to handle. Simple twist 'n go acceleration method leaves out the hassle of shifting gears.

Updated features! JL5B is one of the most dependable 50cc scooters you can find on the market with the impressive road carrying weight capacity!

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters!  Factory direct!  We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Product Highlights:

• Matching rear locking storage trunk (normally a $45 upgrade, now free!)
• Custom designed Windshield FREE (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum Rims
• Hydraulic disc brake
• 3.5 x 12” DOT approved Tries
• EPA approved and street legal in all states except for NJ & PA.

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance

Introducing the All New 2012 Sports Cross Runner-

Exclusively Offered by Sunny Sports! Limited Edition! 

Impressive performance, exceptional handling and remarkable modern sport-styling prove the all-new redesigned 250 RTA is a clear winner in its class.

Designed to be the top performer in its class—it’s the total package that provides all day comfort and effortless handling in the city, exhilarating performance on the open road and the ground clearance and suspension travel needed to truly bring out the adventurer in you.

Engine:

A compact, rock solid 250cc 4 stroke air cooled engine demonstrates the advanced race-proven technology. It provides a smooth curve of power with excellent torque figures from idle to the rev limit.

Transmission Features

the crankcase carries a five-speed close-ratio transmission with an universal standard shifting pattern (one down four up). A race-proven wet clutch contributes to smoother downshifting and corner entry.

Styling:

Wide handlebars and an upright position have been incorporated to give high levels of stability and maneuverability as well as all day comfort and great visibility. Hop into the firm-feeling seat and the RTA feels much more-narrow than most of the sports bikes. While most sport bikes have an aggressive, track-focused riding position, the RTA is the most relaxed of the group. The seat height ranges from 31.7 inches at its lowest setting to 32.5 inches.

The 250 RTA has a clean dash that feeds information to the rider in an aesthetically pleasing and intelligent manner.

RTC one of the lighter bikes in its class. With its 3.5-gallon fuel tank topped of it tips the scales at 340 pounds. With the exhaust routed below the engine it keeps additional weight low to the ground and that translates to its light feel.

Brakes:

With standard-fit ABS, the front and rear disc braking setup of the Cross runner is not only efficient and powerful, but safe too. 270mm disc is arrested by two-piston calipers at the front, whilst rear 220 mm discs adopt a twin-piston caliper for precise control.

Extensive development work with the ratio of master cylinder-piston to caliper-piston ratios has achieved a high degree of rider feel for optimized levels of braking control and heightened aspects of rider feedback.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Product Highlights:

• 4 Stroke 250CC Air cool Engine Top speed 65+ mph
• Race-developed & lightweight conventional forks delivers superb feedback and consistent performance.
•  Aluminum Rims
• Upright seating position
• Front & Rear Hydraulic disc brakes
• Front 110/70/17 Rear 130/70/17 DOT approved tires
• Dual Rear Shock
• EPA approved and street legal in all states Exclude CA & NJ.

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance

US EPA (Environmental Protection Agency) APPROVED

Unique & Genuine Factory VIN Number

 
US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA, PA and NJ. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation:  We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

Where to locate your VIN#:

Vehicle Identification Number is usually located on the front of the steering stem or at the bottom of the floor mat, where you would place your foot. The VIN number consists of a 17 digit alpha numeric number, and usually has the engine number located on the same plate. The plated steel mount can be either black or steel.

Each MSO Title certificate will be accompanied by a Bill of Sale and Invoice for registration purposes. If your state requires your MSO to be notarized, please indicate on your MSO request form. There is a $25.00 fee for each notary. We offer overnight service for an additional $55.00. Please note: overnight service only guarantees we mail your documents via overnight service. We do not guarantee your MSO will be prepared and processed overnight. There is $20.00 fee for each replacement MSO.

Once you receive these documents, you need to take them with your scooter or motorcycle to your local DMV (Department of Motor Vehicle). They will inspect the bike and compare the VIN (Vehicle Identification Number) on the paperwork to the one on the scooter. They will inspect the vehicle as well. Your DMV will collect the sales tax as well as any applicable registration fee and will issue a license plate for your vehicle.

The certificate of origin is an official title document that releases the scooter from the importer to the dealer. The dealer released the scooter to you. All documents for every street legal vehicle are usually sent in the mail 2 to 4 days after the scooter is shipped. Please note, we do not mail your MSO and Bill of Sales alone with your scooter, there is a possibility of receiving your registration information before you even receive your vehicle, since the LTL trucking company usually has longer transit time frame compares to first class mail service. We request each customer to confirm your VIN by email if you don’t receive your registration documentations 7 business days after receiving your street legal scooter or motorcycle. To confirm: simply send an email to mso@scooterdepot.us include your order number and VIN in the subject or the body. We have professional title staff to process your title request immediately. MSO request generally requires 3-5 business days to process, and it is FREE of charge. The VIN (Vehicle Identification Number) is a unique 17 digit number. The VIN can be found on the outside of the shipping carton or on the scooter itself. You may also contact our MSO department representatives directly at 626-343-2077.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

 Introducing the All New 2012 Sports Cross Runner- Exclusively Offered by Sunny Sports!

Limited Edition!

Impressive performance, exceptional handling and remarkable modern sport-styling prove the all-new redesigned 250 RTC is a clear winner in its class.

Designed to be the top performer in its class—it’s the total package that provides all day comfort and effortless handling in the city, exhilarating performance on the open road and the ground clearance and suspension travel needed to truly bring out the adventurer in you.

Engine:

A compact, rock solid 250cc 4 stroke air cooled engine demonstrates the advanced race-proven technology. It provides a smooth curve of power with excellent torque figures from idle to the rev limit.

Transmission Features

the crankcase carries a five-speed close-ratio transmission with an universal standard shifting pattern (one down four up). A race-proven wet clutch contributes to smoother downshifting and corner entry.

Styling:

Wide handlebars and an upright position have been incorporated to give high levels of stability and maneuverability as well as all day comfort and great visibility. Hop into the firm-feeling seat and the RTC feels much more-narrow than most of the sports bikes. While most sport bikes have an aggressive, track-focused riding position, the RTC is the most relaxed of the group. The seat height ranges from 31.7 inches at its lowest setting to 32.5 inches. The way the seat and tail section are shaped lock the rider in place and help keep riders from moving around too much.

The 250 RTC has a clean dash that feeds information to the rider in an aesthetically pleasing and intelligent manner.

RTC one of the lighter bikes in its class. With its 3.5-gallon fuel tank topped of it tips the scales at 340 pounds. With the exhaust routed below the engine it keeps additional weight low to the ground and that translates to its light feel.

Brakes:

With front and rear disc braking system, the Cross runner is not only efficient and powerful, but safe too. 270mm disc is arrested by two-piston calipers at the front, whilst rear 220 mm discs adopt a twin-piston caliper for precise control.

Extensive development work with the ratio of master cylinder-piston to caliper-piston ratios has achieved a high degree of rider feel for optimized levels of braking control and heightened aspects of rider feedback.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in ChinoCalifornia. We are here 7 days a week to assist you with your every need.

Product Highlights:

• 4 Stroke 250CC Air cool Engine Top speed 65+ mph
• Race-developed & lightweight conventional forks delivers superb feedback and consistent performance.
• Aluminum Rims
• Upright seating position
• Front & Rear Hydraulic disc brakes
• Front 110/70/17 Rear 130/70/17 DOT approved tires
• EPA approved and street legal in all states Exclude CA, PA & NJ

Remember every purchase from Scooter Depot includes:

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance

US EPA (Environmental Protection Agency) APPROVED

Unique & Genuine Factory VIN Number

US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA, PA and NJ. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation: We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

New Arrival! Brand New 2012 Models are here! 

One of the most highly recommended scooters by our customers and dealers based on affordability, quality and dependability. This 50cc scooter features a 49.5cc air-cooled, 4-stroke engine that provides over 2.7hp. The CY50A is one of the most dependable scooters for the money.

The Basics:

They are popular because they are not only fuel efficient (up to 120 mpg) but also can be driven without a special license in most areas. They are simpler to get on and off and easy to handle. Simple twist 'n go acceleration method leaves out the hassle of shifting gears.

Benefits of owning the CY50A scooter?

Price and upgraded features! This is one of the most affordable scooters you can find on the market! The impressive gas mileage makes this 50cc scooter a perfect economical way of getting around. In addition to all the amazing advantages of this 50cc moped scooter, they also don't cost much to maintain. The CY50A is equipped with a 50cc 4-stroke engine that is much quieter, cleaner, and lasts longer than comparable 2-stroke engines.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t pick products from different factories; we design, select the best quality parts, and build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

Product Highlights:

• Matching rear storage trunk with lock (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Hydraulic disc brakes
• 3.5 x 10" DOT-approved tires
• EPA approved and street legal in all states except for NJ & PA.
  

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance

   

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST. 

	User Friendly and Easy to Read Instrument Panel The large easy to read instrument panel tells you just about everything you need to konw when operating your scooter. The panel shows Speedometer, Odometer reading, RPM, Turn Signals, and Fuel Gauge.
	13 inches Aluminum Alloy Rims / Powerful ABS Front Disc Brake 13" Aluminum Alloy Rim fits the color of your vehicle. Fully upgraded ABS hydraulic disc braking system on the front. Front ABS Disc brakes are the best possible brakes any scotoer can have. Brake at a red light with confidence, with the advanced Hydraulic braking system.
	Lockable Large Rear Luggage Trunk with Built-in Passenger Back Rest! Store anything you need to take with you in the spacious trunk. Provides addtional riding comfort to your passenger!
	Enhanced Large Bright Taillight with Turn Signals Bright multireflector taillight for great visibility when you ride at the night.
	Reinforced Dual Rear Suspensions Reinforced Rear Dual Supension can make your ride as comfortable as it can be.
	High Performance Aluminium Alloy Housing Exhaust A great add-on feature to its imcomparable style! It incorporates catalyst coating and exhaust purifier device to reduce noise and air pollution.
	Free Assembly Tools Kit We offer Free Tools Kit with this model. Competitors similar items either DO NOT have it or sell $40 more!

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation:  We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

Where to locate your VIN#:
Vehicle Identification Number is usually located on the front of the steering stem or at the bottom of the floor mat, where you would place your foot. The VIN number consists of a 17 digit alpha numeric number, and usually has the engine number located on the same plate. The plated steel mount can be either black or steel.

Each MSO Title certificate will be accompanied by a Bill of Sale and Invoice for registration purposes. If your state requires your MSO to be notarized, please indicate on your MSO request form. There is a $25.00 fee for each notary. We offer overnight service for an additional $55.00. Please note: overnight service only guarantees we mail your documents via overnight service. We do not guarantee your MSO will be prepared and processed overnight. There is $20.00 fee for each replacement MSO.

Once you receive these documents, you need to take them with your scooter or motorcycle to your local DMV (Department of Motor Vehicle). They will inspect the bike and compare the VIN (Vehicle Identification Number) on the paperwork to the one on the scooter. They will inspect the vehicle as well. Your DMV will collect the sales tax as well as any applicable registration fee and will issue a license plate for your vehicle.

The certificate of origin is an official title document that releases the scooter from the importer to the dealer. The dealer released the scooter to you. All documents for every street legal vehicle are usually sent in the mail 2 to 4 days after the scooter is shipped. Please note, we do not mail your MSO and Bill of Sales alone with your scooter, there is a possibility of receiving your registration information before you even receive your vehicle, since the LTL trucking company usually has longer transit time frame compares to first class mail service. We request each customer to confirm your VIN by email if you don’t receive your registration documentations 7 business days after receiving your street legal scooter or motorcycle. To confirm: simply send an email to mso@scooterdepot.us include your order number and VIN in the subject or the body. We have professional title staff to process your title request immediately. MSO request generally requires 3-5 business days to process, and it is FREE of charge. The VIN (Vehicle Identification Number) is a unique 17 digit number. The VIN can be found on the outside of the shipping carton or on the scooter itself. You may also contact our MSO department representatives directly at 626-343-2077.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

• Matching rear locking storage trunk (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum Rims
• Front & Rear tires 130/60-13
• Front ABS Hydraulic Disc Brake
• EPA approved and street legal in all states except CA,NJ

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance
   

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

Exclusively Offered By ScooterDepot!

The all-new 2011 Sunny Firefox 150 is your ticket to ride—wherever you want to. It’s a great new addition to our scooter line that combines sportbike-inspired styling, on-the-go convenience and great fuel economy into a package that makes riding fun.

There’s nothing wrong with retro, but when you’re riding every day you need a scooter that offers you all the modern conveniences and features that the Firefox 150 does. Its advanced technology and design not only make this scooter practical, they make it more fun to ride.

It is more than just meets the eye! The Firefox 150 is all about taking care of its rider. A large seat allows you get room to move around and your passenger gets plenty of room too. The full-length floorboards and step-through design also makes getting on and off a whole lot easier.

This brand new sporty design was given some serious upgrades. Powerful rock-solid GY6 4- stroke 150cc motor is packed into the stylish body frame allow the rider maintain an average speed of 60mph. With its 13 inch wheels, hydraulic tuned suspension and upright seating position make for an impressively stable ride for rider and passenger. Plenty of power and room for two, with integrated passenger foot rest. This smooth machine gets up and goes with ultra quick throttle response and a comfortable ride.

The gauges are clean, simple and easy to read.  It also offers plenty of storage space under the seat. If that's not enough there's also a locking storage compartment provided at no additional charge with the purchase of the scooter.

4 stroke 150cc with Fully Automatic Transmission:  This scooter is equipped with a powerful 4stroke engine provides power for a strong ride on any road condition. The 4-stroke engine ensures a fast and easy startup because there is no need to mix any fluids, just gas it up and go! Plenty of power and room for two, and relatively quiet, if a little busy at higher revs, the 150 has enough poke that you don't need to consider major arterials. Top speed is over 65 MPH. This is a great vehicle for those first-time-riders or for anyone who doesn't want to deal with the hassle of changing gears.

Contemporary Telescopic Front Forks / High Performance Hydraulic ABS Disc Brakes:  This 150 gas Moped features the fully upgraded ABS hydraulic disc braking system on the front, which delivers smooth stops in half the distance of standard. Safety concerns often put off potential scooter buyers, but with this breaking system there will be no problem stopping in an emergency or even in the rain. The ABS braking system allows the novice to brake as efficiently as a rider with years of experience. These advanced new safety systems ensure that the front wheel will not skid under braking no matter what the road condition, furthermore stopping distances will be dramatically reduced by over 8.2 meters. Inspire confidence and relaxation for all riders. You could grab as little or as much as you want and the single rotor and piston set-up will pull you up without hesitation or complaint from the standard tyres.

Up to 90 MPG:  Ultimate Gas Saver! This gas scooter for sale gets 90 miles per gallon which is extremely fuel efficient and environmentally friendly.

Electric and Kick Start:  This scooter comes with both electric and kick starting system that makes it simple to start up, even for first time riders. If you somehow get into trouble though, then it is always great to have a reliable back up kick start method.

Enhanced Headlights:  This 150cc scooter features ultimately enhanced headlights with low beam - high beam. These headlights are bigger and provide light at angles that most mopeds cannot support.

Stylish User Friendly & Easy to Read Dash Console:   The easy to read dash is well laid out with a nice big white dial in the centre to indicate speed. It shows Speed, Fuel gauge, high-low beams and turn signals.

Upgraded Mirror-finished chrome-covered exhaust:  A great additional to its already incomparable stylish design. It really made this scooter look like a premium scooter, not something that was slapped together cheaply.

Tons of Storage Space:  Lockable gloves box located in the front underneath instrument panel area, Carrying compartment under locking seat is big enough for storing a full-face helmet and standard tools; Lockable rear Trunk with Built-in Reflectors. Plenty of room for you to carry your personal belongings.

Pre-Built License Plate Bracket:  Pre-built in Universal Size license plate holder to make your scooter riding experience as easy as possible.

You are probably wondering how we can afford to sell these scooters at such low prices. We don’t hand pick products from different factories; we design, we select the best quality parts, and we build our own scooters! Factory direct! We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We are here 7 days a week to assist you with your every need.

• Matching rear locking storage trunk (normally a $45 upgrade, now free!)
• High performance drive belt & Japanese designed carburetor
• Aluminum Rims
• Front & Rear tires 130/60-13
• Front ABS Hydraulic Disc Brake
• EPA approved and street legal in all states except CA &  NJ

• Free Residential Service fee with lift gate service.
• Your unit started and tested by our mechanics before it is sent to you!
• Free MSO and Bill of Sale 
• Life Time technical support
• 1 year Engine and Frame warranty
• Full parts availability
• Factory Direct Pricing
• 100% Freight protection insurance. 

STREET LEGAL:

US EPA (Environmental Protection Agency) APPROVED

Unique & Genuine Factory VIN Number (Conforms with US Federal Motor Vehicle Safety Standard FMVSS)

 
US DOT (Department of Transportation) APPROVED

This Motorcycle/Scooter is registrable with department of motor vehicles and legal to own and operate in the public road in all states except for CA and NJ. Title, stickers, and other registration documents will be included with your purchase.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Free Registration documentation:  We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. of Motor Vehicles. The MSO is such an important document and is not supposed to be shipped with the scooter, it will be mailed to you after you receive your scooter and email us the VIN number on the scooter. MSO generally requires 2 ~ 4 days to process.

Where to locate your VIN#:
Vehicle Identification Number is usually located on the front of the steering stem or at the bottom of the floor mat, where you would place your foot. The VIN number consists of a 17 digit alpha numeric number, and usually has the engine number located on the same plate. The plated steel mount can be either black or steel.

Each MSO Title certificate will be accompanied by a Bill of Sale and Invoice for registration purposes. If your state requires your MSO to be notarized, please indicate on your MSO request form. There is a $25.00 fee for each notary. We offer overnight service for an additional $55.00. Please note: overnight service only guarantees we mail your documents via overnight service. We do not guarantee your MSO will be prepared and processed overnight. There is $20.00 fee for each replacement MSO.

Once you receive these documents, you need to take them with your scooter or motorcycle to your local DMV (Department of Motor Vehicle). They will inspect the bike and compare the VIN (Vehicle Identification Number) on the paperwork to the one on the scooter. They will inspect the vehicle as well. Your DMV will collect the sales tax as well as any applicable registration fee and will issue a license plate for your vehicle.

The certificate of origin is an official title document that releases the scooter from the importer to the dealer. The dealer released the scooter to you. All documents for every street legal vehicle are usually sent in the mail 2 to 4 days after the scooter is shipped. Please note, we do not mail your MSO and Bill of Sales alone with your scooter, there is a possibility of receiving your registration information before you even receive your vehicle, since the LTL trucking company usually has longer transit time frame compares to first class mail service. We request each customer to confirm your VIN by email if you don’t receive your registration documentations 7 business days after receiving your street legal scooter or motorcycle. To confirm: simply send an email to mso@scooterdepot.us include your order number and VIN in the subject or the body. We have professional title staff to process your title request immediately. MSO request generally requires 3-5 business days to process, and it is FREE of charge. The VIN (Vehicle Identification Number) is a unique 17 digit number. The VIN can be found on the outside of the shipping carton or on the scooter itself. You may also contact our MSO department representatives directly at 626-343-2077.

Some Assembly Required. In most cases and depending on which model purchased, it usually takes anywhere from 30 to 90 minutes to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping.To complete the assembly of your vehicle, you will need to properly install and/or assemble the contents included with your vehicle. Depending on the model purchased, these items are usually located in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time and periodically thereafter. Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need to be cleaned due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our technical support team. Local pick-ups and optional assembly service is available upon request. 

Remember! You are responsible for performing the setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform (ie. installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc.).  In some instances, it may be necessary for your vehicle to be setup and tuned by a local service center. Items such as loose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loss of hardware. Occasionally, on some units, it may be necessary to perform other routine checks or adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment (if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Prior to first use, it is mandatory to have the existing motor/engine oil (known as “packing oil”) replaced. The packing oil should be replaced with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil. Be sure to regularly inspect engine fluid levels to ensure that your vehicle operates safely according to manufacturer’s recommended specifications. 

Please, feel free to contact our technical support team at tech@scooterdepot.us or (909)287-0366. Our technical support team is available Monday through Friday, 8am to 5pm PST.

Remember every purchase from Scooter Depot includes:

Product Highlights:

Key Features:    - Back to Top -

FREE:  12 Months Motor Frame Warranty / All Parts are in Stock!
FREE:  Lifetime Technical Support
FREE:  High Performance Disc Brakes
FREE:  Owner's Manual Handbook/ Tool Kit
FREE:  Shipping Insurance
FREE:  24 Hours Delivery Notification
FREE:  Signed and Filled MSO / MCO and Bill of Sale provided at no extra charge

Street Legal:  The SUNNY air cooled uses a 250cc 4-stroke engine keeps up with all traffic and rides smooth. Wide comfortable seats, Front & rear Disk Brakes, 13" cast alloy wheels, up to 80 mph, windscreen, and halogen lights. Our most popular selling cruise scooter. Low maintenance, easy care, and great gas savings. This scooter as a street legal vehicle
in 49 states not including California.

Free Registration documentation: We provide a complete MSO (Manufacturer's Certificate of Origin) and the Bill of Sale which might be required for registration at your local Dept. The MSO is such an important document and is not supposed to be shipped with the dirt bike, it will be mailed to you after you receive your dirt bike and email us the VIN number on the dirt bike. MSO generally requires 2 ~ 4 days to process.

Technical Support: We are a DMV certified full line dealership, our experienced technicians provide professional service that you can count on, phone number to technical support is 888-839-7088 or 909-287-0366 Monday thru Friday, 9am to 5pm PST. Please provide order information when you call.

Description:    - Back to Top -

Some Assembly required: In most cases and depending on which model purchased, it usually takes anywhere from 10min.-40 min. to complete the assembly process of your vehicle. Our vehicles are usually 80% assembled at the factory and fully tested prior to shipping. For packaging purposes, the battery, handle bars, trunk(if included at time of puchase), and mirrors are removed during testing. These items along with the vehicle will be shipped in a protective crate. To complete the assembly of your vehicle, you will need to properly install/assemble the contents included with your vehicle. Depending on the model purchased, you will usually find these items in the storage compartment underneath the seat. For your safety, be sure to check and tighten all screws, nuts, and bolts prior to using your vehicle for the very first time,(and periodically before every ride). Depending on the length of time the scooter has been stored in the crate after factory testing, the carburetor may need some cleaning due to possible sediment build-up. Detailed instructions on how to perform this procedure can be obtained by contacting our tech support team toll-free Monday through Friday 8am-5pm PST at 909-287-0366, or by E-mail at tech@scooterdepot.us. In some instances, it may be necessary for your vehicle to be setup by a local service center for proper set-up and tuning, prior to initial use. This service is commonly referred to as PDI(Pre-Delivery Inspection). Be sure to check for adequate engine fluid levels to help ensure that your vehicle will operate safely according to the manufacturer’s recommended specifications, prior to first use. It is mandatory to have the existing motor/engine oil(known as “packing oil”) already in your motor/engine, replaced prior to first initial use, with conventional Four Stroke “Motorcycle Grade” (SAE 15W-40 motor oil). Local pick-ups and optional assembly services are available upon request.

Remember! You are responsible for performing the setup/”PDI” that a dealer would normally perform. i.e.- installing rear view mirrors, setting up and connecting the battery, checking tightness of all screws, nuts, bolts, changing oil, etc. Items such as lose hardware and parts damaged from loose hardware and components are not covered under warranty. It is advisable to use a thread locking agent such as Loctite on all hardware to help prevent loose of hardware. Occasionally, on some units, it may be necessary to perform other routine checks/adjustments, such as adjusting the setting of the idle speed and fuel/air mixture screws on the carburetor, cleaning of the carburetor, checking to ensure wires are connected properly, adjusting chain slack and alignment(if applicable), in order to achieve optimum performance from your vehicle. We will gladly assist you with any additional technical questions you may have.

Please, feel free to get in contact with our Tech Support Department either by E-mail at tech@scooterdepot.us or by phone at (909)287-0366

BE A RESPONSIBLE RIDER! FOR SAFETY, READ YOUR OWNER'S MANUAL. ALWAYS WEAR A HELMET, EYE PROTECTION, AND PROTECTIVE CLOTHING! NEVER RIDE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL! Parents consider your youngster's age, size, ability, and maturity before allowing them to ride. Never engage in stunt driving or ride at excessive speeds. Be careful on difficult terrain. An adult must supervise riders under 16 years of age. ScooterDepot recommends that ALL riders take a training course. For more information visit the ASI website www.safety.org